+90 332 342 32 00
TR EN
+90 332 342 32 00
EN
TR EN
HIGH
QUALITY
SUPERIOR
PERFORMANCE

The product can be installed without opening the product cover with the standard socket model and warning led light that is not found in any product that can replace the consensus level sensor.

ROTARY SWITCH
LEVEL CONTROLLER
KMS.001

ROTARY SWITCH CONTROLLER

It is used for level control in warehouses such as tanks, bunkers and silos where dust, fluid, granular materials are stored.

MORE

ROTARY SWITCH LEVEL CONTROLLER

We offer the necessary automation and technical consultancy regarding the installation and working systematics of our product.

MORE

DEMO PRODUCT
REQUEST FORM

You can request a demo from Konsens level meter product by filling out the form below.

WHAT?

It is used for level control in warehouses such as tanks, bunkers and silos where dust, fluid, granular materials are stored.

SCOPE OF APPLICATION

Food Industry; Grain, Flour, Salt, Granulated Sugar, Coffee, Barley, Sunflower, Corn, Peanut, Powder, Wheat, Milk Powder, Cocoa etc. It is used in similar products in the Plastic, Mining, Chemical, Wood and Feed industries.

EASY MONTAGE

With our socket assembly that is not found in any substitute products on the market, the product can be mounted with the socket without opening the cover. With two types of sleeves and the desired sleeve It can be used.

WORKING SYSTEM

The sensor is mounted in a suitable place where the material will be controlled. It is controlled by feeding from the 4-pin socket without opening the cover of the sensor and taking the contact outputs (NO-NC) safely.

It moves the flag at the end of the shaft circularly by means of a synchronous motor shaft. When the material reaches the sensor flag level, the rotation stops.

The motor itself moves and activates the connection output by getting rid of the two switches and the first one inside. Then it stops the engine by pressing the second switch.

After the material is lowered from the level, the motor returns to its former position and starts working again. The output becomes passive.

Led on the sensor cover shows the status of the output. It lights red when it is inactive, and green when it sees the material in active state.

The hardness can be adjusted by changing the spring position according to the density of the measured material.
TECHNICIAL SPECIFICATIONS E-CATALOGUE